Liverpool Comic Con – Part 2

Liverpool Comic Con

Friday 8th March – Sunday 10th March 2019

Exhibition Centre Liverpool

 

Welcome back to my over view of Liverpool Comic Con.  Last time, I shared photos of some of the amazing Cosplay outfits to be seen at the event.  This time, I thought I’d share some pics of the eye-popping props on display.

The selection of display items at this convention was another selling point, with plenty to view.

Star of the show was a full scale X-Wing Fighter, which dominated the exhibition hall on entry.  It was spectacular: the size and detail both being extremely impressive.  Even though, as I stated previously, it was a Disney Star Wars ship and not the version from the classic trilogy, it was pretty cool.

Just imagine how ace it would’ve been if it was a full scale Incom T-65  X-Wing Fighter, as flown by Luke in Episode IV?!  If only.

There were several vehicles from film and TV also, including BA’s van from The A-Team and KITT from Knight Rider.  Both awesome.

I’ve seen a Back to the Future DeLorean before, but it’s always a treat.  This one was, of course, tricked out with other props from the film too – like Marty’s hover board.

In addition to vehicles, I also saw costumes from Battlestar Galactica and Buck Rogers in the 25th Century – two Glen A Larson classics from my childhood.  I was pretty stoked to witness these first hand, being a huge fan of both television programmes.

Not to mention there was a ton of Star Wars costumes, helmets and gadgets that I didn’t get round to photographing.  I did take a pic of my all time hero R2 D2 though (and one of Johnny 5 from Short Circuit, another star of the day).

I assume all the props I saw were reproductions rather than actual items used in filming (I could be wrong).  However it was still a thrill to see them.  If only I could’ve actually sat in the vehicles…

Visit the Liverpool Comic Con Website here.

Star Wars Figures – the Next Wave

A long time ago, in a galaxy far, far away…

Actually, it was just a few months ago that I wrote a blog about my collection of original Star Wars figures.  Last time I looked at the initial run of 12 figures; this time here’s a piece about the next wave to come along.

I hadn’t managed to collect all of the first twelve before the next batch of figures were released (sadly, this would be a recurring situation in my figure collecting).

After the phenomenal success of the first toys in the Star Wars line, additional figures were introduced to provide fanatics like me with further material for our mini universe.  This development would introduce hours more fun recreating classic scenes from the movie, or indeed inventing your own.

 

Most exciting was the introduction of four creatures from the Mos Eisley cantina – always my favourite scene from all of the movies.  Although in those pre-home video days, I can remember having trouble recalling where some of these characters actually appeared…

Greedo – who was sometimes referred to as “Green Greedo” on some card backs (I always found that a bit daft) was easily recognisable.  Scouring my Star Wars story book revealed an image of Hammerhead, and repeated rewinds when the video finally materialised revealed Snaggletooth too.  Though this was a real challenge when watching the cropped for television version.

Walrus Man was a bit of a mystery, however.  Who was this strange, orange swimsuit wearing individual?  It wasn’t until years later that the chief suspect was confirmed, he was supposed to be the cantina bully who picked on Luke (later named Ponda Baba).

The detail of these aliens was variable – Greedo was, and still is, awesome.  Hammerhead and Snag were also very cool.  Walrus Man, on the other hand… 

No matter, I was a sucker then for obscure alien characters and I probably always will be!

I can clearly remember that the first figure that I got from this set was R5-D4.  He was from the Toy and Hobby shop in Chester.  The last one was Power Droid, who took me ages to find.  I think that figure finally turned up on a family trip to Skegness around 1982.

Death Star Droid was another nice replication, though repeated video viewings revealed that this silver version of the droid was seen on the Jawa Sandcrawler; a shiny black version appeared on the battle station.

Luke in his X-Wing Pilot outfit was the first time a character was re-released in a new outfit.  A great figure, I collected a few over the years to be additional Rebel pilots.  Like a lot of fans, my original Luke X-Wing was often recast as Wedge.

The great thing about this wave of figures was that it added minor character to my collection.  This went a small way towards recreating the world of Star Wars, with its hugely imaginative population of droids and creatures.  Populating my own mini scenes from the film was a major reason I kept collecting.

Finally, I must mention Blue Snaggletooth.  For those not n the know, the blue variation of this character was the first version produced and included in a US Sears exclusive set.  The toy manufacturer, Kenner, had scant resources to refer to (no lower body reference) and so produced a regular height figure, with kitsch silver space boots.  Lucasfilm then decreed that Snag was short and had hairy feet, so the version produced for the mass market was somewhat different.

To my knowledge, the blue variant was never released in the UK; I was unaware that this toy even existed till I started collecting again in the mid 90s.  I found this version in a comic shop in Rhyl, and after some soul searching, spent my savings and snapped him up for £90.  This is the most I have ever spent on a Star Wars figure, even the ultra rare toys were fortuitously bought for a couple of quid whilst still in the shops, years earlier.

I’m so, so glad I got him though!

A nice coincidence: the red Snaggletooth, always a favourite, was bought from a toy shop in Rhyl around 1979.  His blue cousin came from the same town twenty years later.

Never, ever, underestimate the wonder of Rhyl.

Sci-Fi Action Figures

Science fiction action figures are the basis for any good toy collection.  My collection of Star Wars toys goes right back to the late 1970’s, and I’ll get round to posting some pictures of those in the future.  Oh yes, it shall happen.  Any requests, let me know.

In the meantime, I thought I’d showcase some alternative items that have been lurking around for over thirty years.  These figures aren’t always mint condition, and rarely have all the accessories they came boxed with.  And there are certainly no boxes (or cards) now, as they were all actually played with…

Battlestar Galatica figures

These 3 3/4″ action figures were produced by Mattel in the late 1970’s, to coincide with the release of the television show.  They were obviously aiming to emulate the phenomenal success of Kenner’s Star Wars figures.

IMG_2563

Battlestar Galactica figures

On the left of the photo is the Imperious Leader figure, all in good condition – but then other than the cloak, he didn’t have any accessories.  In the middle is Commander Adama, who bears a slight resemblance to Lorne Greene.  Unfortunately Adama’s cloak and gun are long gone.  The Cylon Centurion is the coolest figure here, though mine has lost a lot of his silver finish.  The laser gun is around however, though I didn’t use it for the picture.  The Cylon was my first Battlestar Galactica toy, a present from my Dad.

There were some other cool figures produced in this line, in particular the Ovion and Daggit were great.  Unfortunately I never owned either.  I would’ve also loved a Lt. Starbuck, but I never saw one.  Ever.

Great show, Battlestar Galactica – I love the original and the rebooted, recent version.

The Black Hole figures

Disney’s The Black Hole, however, was not that great a movie.  At least not when I saw it on TV as a kid.  Maybe I should try it again, to see if I was just too young to dig it.

IMG_2561

The Black Hole figures

The action figures for this film, again 3 3/4″ like Star Wars figures – were multi jointed.  As a result, the human figures were rather frail.  I had a few of them, now reduced to limbless torsos.

No matter – the stars of the show were the robots, and here we have two of the best.  The Sentry Robot (left) was particularly cool, with a holster to hold his pistol.  I have the gun safe, so this one’s probably worth a load on ebay.  Note the joints which are clearly visible.

Also, we have V.I.N.CENT – a cool design for a robot.  Laser guns and big, cute eyes.

IMG_2564

Blake’s 7 Liberator

Blake’s 7 

Not an action figure – this is a Corgi toy of the Liberator spaceship from BBC sci-fi serial, Blake’s 7.  You can see the Corgi stamp on the photo.  Quite a cool design for a TV spaceship.  I quite liked Blake’s 7 when I was a kid, and remember being surprised at the end…

I have lots of fond memories of finding and playing with these toys when I was young.  They’re  great souvenirs of old films, and fun times – and imagination.