Tag Archives: wheels

New Skateboard 2022 – Death Benson

Posted on by
5

OK, I get no one reads these posts about my latest skateboard, but I’m not writing this for an audience. I’m writing it for me. One day, when I’m ancient like Yoda, I’ll be able to look back and have a memento of skateboards I’ve had in the past.

Wish I had at least a photo of the decks I had when I was a kid in the 80’s. That would’ve been cool. As it is, I can’t even remember them all. Not so anymore. Now, I’ll have a permanent record of them all.

For the first time in a long time, I saved up some cash and bought a full, new set up. For a while, I’ve been recycling my trucks (and sometimes wheels) to be as economical as possible. This time, it was new everything – ordered from the very nice folks at Native Skate Store.

Here are the details:

  • Death skateboards Benson Devil Woman II 8.25″ deck (with free Jessup grip tape)
  • Independent Trucks 144 Mid Stage II
  • Death skateboards wheels 52mm
  • Independent Trucks GP-S bearings
  • Independent Trucks allen bolts 1″

The set up has been fantastic so far, deck has nice pop and the trucks turn great. I love the graphics by Liane Plant (regular readers may remember I have an 8.5″ version of this deck to go on the wall, and I’m a big fan of Death skateboards). No complaints at all.

Though I’m not going to be able to share this post on Facebook due to the “offensive” graphic…!

See you out on the streets.

The Death Skateboards website is here.

Liane Plant’s website is here.

Visit the Native Skate Store here.

New Deck Update – Death Patrick Melcher

Posted on by
Reply

Continuing my ambition to document all of my skateboard decks, here’s my latest set up for 2021. My Death “Script” in red got worn out through a load of skating (or attempted skating, ha!), so I needed a replacement.

To take over as my day to day skateboard, I ordered another Death deck, the Benson Devil Woman from good ol’ Native Skate Store. It’s 8.5″ wide, great concave and a spectacular graphic from the legendary Liane Plant.

So amazing is this graphic, that I had second thoughts about skating it.

I already had a Death Patrick Melcher deck that I had bought and was planning to hang on the wall. Fantastic mermaid graphic (by L. Plant again, of course) which I’ve shared before on the Virtual Hot Tub, and I thought it would be great as a display piece.

I was in a pickle: do I set up and skate the Benson as intended, or switch to the Melcher? Both great graphics, great shapes and great boobs – but as classic as they are, I needed something to ride.

As the Melcher Mermaid is 8.25″ wide, that was the final deciding factor. Slightly less wide than the Devil Woman, I felt that this would suit me better. I’ve been right so far – the mermaid feels slightly more “me” than my previous 8.5″ Script deck.

The Patrick Melcher is set up with my Independent trucks and Death wheels – and I love it.

Which means that the Benson Devil Woman will go on the wall as an art piece. At least for now…

The Death Skateboards website is here.

Liane Plant’s website is here.

Visit the Native Skate Store here.

New Deck 2021 – Death

Posted on by
Reply

Skateboards don’t last forever. A couple of the decks I have bought over the years I’ve bought to display, but I’m not a collector, as I’ve said before. All of the other decks that I’ve bought are to be skated.

Not that I’m against deck collecting, I just can’t afford it!

So in order to preserve my latest deck for posterity, here it is – a Death Skateboards “Script” deck in red and white. I’ll cherish the photos, ‘cos already I’ve skated it and it’s getting beat up (just as it should be). It’s 8.5″ wide and it skates great.

Yet another Death deck, and bought again from the ever reliable Native Skate Store. I also got some new 53mm Death wheels, some bearings, and Native threw in some stickers. I do love stickers.

There we have it: my current set up. And what a beauty it is.

Visit the Death Skateboards website here.

Visit Native Skate Store here.

New Deck 2019 – Death Skateboards Richie Jackson

Posted on by
Reply

A few weeks back, I got a new deck and (eventually) set it up to ride.  I took some photos to commemorate the beautiful graphic and general awesomeness of the full, set up skateboard.  Here it is, for our mutual enjoyment.

Again, I opted for a Death deck – and again a Richie Jackson model.  Great company, inspirational skater.  This is an 8.25″ wide model.

According to the graphic, it’s a Richie Jackson “Collectors Shred Sled” – but this particular baby ain’t going on the wall.  Oh no, it’s for shredding, not collecting.

The deck was ordered from Native Skate Store.  The merchandise arrived with no problem at all, everything was perfect.

I also ordered a set of 53mm Death wheels from Native.  Together with a new set of ABEC 5 bearings, and my previous set of Independent trucks, I was able to piece together the work of art you see here.

It’s a great set up and I’ve really enjoyed riding it so far.  No complaints whatsoever.  The deck width is perfect for me for me these days, so I’ll stick with that for now.  The wheels are rolling well too, I’d forgotten how nice a feeling it is to ride a new set.

These photos were taken a few weeks ago, and this skateboard doesn’t look as fresh as it used to.  There are quite a few scrapes from concrete and the number of those marks is growing.  But hey, that’s the way it goes.  It’s great to skate and that’s all that matters.

Still, it’s nice to be reminded of that brand new, virgin set up in these photos.  There’s just something incredibly rad about getting – and skating – a new skateboard.  I never get tired of it.

The Death skateboards website is here.

Check out Native Skate Store here.

And don’t forget to check out Richie Jackson on social media!

Two Bare Feet Longboard

Posted on by
Reply

OK, so I admit: I don’t really need another longboard.  I already have Sector 9 and Mindless longboards.  But I found this Two Bare Feet set up for a crazy price and I couldn’t resist.

I first came across the brand in a surf shop in Rhosneigr, Anglesey.  They looked pretty cool and I looked them up online.  In particluar, I was interested to try out this type of shape, with the drop through trucks too.

This is a 42″ 821 complete longboard, and it’s ridiculously cheap to buy from the Two Bare Feet online store.  In fact, the low price made me cautious and it was a while before I clicked “purchase”.

I had to wait to get some spare cash together anyway, and in the end I figured the risk was minimal.

Glad I decided to buy: for a budget board, I’ve been very impressed so far.

As I stated, I really wanted to try out this “twin tip” shape deck and it’s turned out to be a lot of fun.  Although I had been curious about learning tricks on this shape deck, so far I’m not convinced that’s a good move (though that’s my problem, nothing to do with the board).  It has been good fun for cruising around on though.

I’ve never skated drop through trucks before, and I like the lower ride they provide.  I found these trucks a bit unresponsive at first however; this problem seems to be improving as they wear in a little.

The board comes with great, big, fat wheels that are nice and soft; they roll very comfortably with the ABEC 5 bearings supplied.

Graphics wise, it’s simple and clean with a slight retro 70’s style that I like a lot.  You can select different graphics and colours (including wheel colours) on the online shop.

The board arrived fully gripped (nice job).  Unfortunately the only major downer was that it was shrink wrapped, which takes ages to remove satisfactorily if you’re obsessive like me.  Still, the whole delivery and transaction was totally painless.  Well done, Two Bare Feet.

This has proven a great addition to my longboard collection, we’ll see how it performs longevity wise.  For now, I would say that this is an ideal skateboard for a more experienced rider to own as a back-up or for a different riding experience.  The real beauty of the 821 complete though, is as a budget price entry level board for a beginner who fancies trying out longboard riding.

Technical Specifications:

  • Length: 42″
  • Width: 9.5″
  • Canadian maple deck
  • 70mm x 51mm wheels
  • ABEC 5 bearings
  • Supplied set up and complete

Two Bare Feet are a British company offering lots of different board riding equipment.  You can visit their website here.

Skateboard Museum: SMA Jim Thiebaud

Posted on by
3

Come with me as I take a roll down skateboarding memory lane, ollieing the cracks as I go…

Santa Monica Airlines Jim Thiebaud

This classic deck dates back to the late 80’s, I picked it up in 1989 if I remember.  At the time the Chester branch of Milletts, the camping and outdoors shop, were stocking skateboards for some reason or other.  They had some pretty rad stuff, too.

When the time came to replace my worn out deck and get a new one, I saved up my pennies/swapped vinyl records and got myself this Santa Monica Airlines deck from Milletts.

At least I think that’s where it was from, I can’t remember.  Either way, I didn’t support a skater owned shop on this occasion, to my shame.

SMA

SMA were really blowing up at the time, and Jim Thiebaud had been on my radar since I saw the (criminally minimal) footage of him in some of the Powell vids.

Thiebaud was – and is – a supremely cool skateboarder with a smooth, rad style.  He was one of those original street pros that I really admired.  Along with Gonz, Natas, Guerrero and Vallely, JT was a bona fide street skating pioneer and innovator.

The shape was perfect for me at the time, exactly how I wanted a skateboard to be.  It’s still a classic shape now, I really like it. Nice size tail, comfy wide deck – but not too wide.  Great street deck of the era.

This deck also had the cool comic book style superhero graphics which I loved.  I’ve always been a big fan of superheroes.

Top view
Graphic

However I wasn’t cool enough to get on this particular wave of popularity earlier.  If I had, I might have picked up the previous variation on the graphic, which featured a bad guy designed to resemble the Joker.  The Batman movie was out around that time, so I guess the whole theme was prominent back then.

So the Joker version had to be scrapped due to some issue with DC Comics, I believe the story goes, and I ended up with the purple suited thug instead.

Side view
Other side

No matter – cool graphic or not, this deck was to be skated.  I transferred my Indy trucks and OJII wheels and was ready to go.  Well, when I’d also added the Powell Rib Bones as well.  Not to save the graphic, mind – in those days the received wisdom (at least amongst my friends and I) was that the rails helped you slide better.

This particular set up was particularly long serving and loyal.  It was like a magic carpet that seemed to respond perfectly to my wishes.  Honestly, I remember learning tons of tricks on this finely shaped beauty.  Footplants and Boneless variations were (still are) major tricks in my arsenal and I learned several on this very set up. 

Biggest of all though, was the kick flip.  We called it an “ollie kick flip” back then, and it was a pretty desirable trick to own.  I learned kick flips on this gorgeously wide beast and was unbelievably stoked.  I still remember that first one.

It was well skated – in fact the tail is worn to a sharp and splintered point – but this set up is still skateable.  It’s still around as it was replaced with thinner decks and trucks as shapes evolved; thus I never swapped it.

The SMA Thiebaud is still on the garage wall, still looks great, and still gets a roll every now and again.  Classic.

Take a close look at the photos and you’ll notice some interesting features:

  • Madrid Fly Paper grip tape (note the fly shapes cut out)
  • Rad SMA top graphic
  • Santa Cruz Cell Block riser pad
  • A couple of cool stickers from back in the day still hanging in there
  • The trucks are fitted with Grind King reversed kingpins, there’s even a sticker on the front hanger…
  • You can see some of the bands I was into at the time from the grip tape art, which I did with Tip-Ex…

New Set Up – Death Skateboards

Posted on by
1

It’s summer, which inevitably means that I attempt some skateboarding yet again.  So far this year, I’m happy to report that I’ve learnt/re-learnt some new tricks.  This does however mean that my ankles are wrecked and I can hardly walk.

I needed a new deck, so I paid a visit to my old friends at Lost Art skate shop in Liverpool.  After a bit of an adventure finding the new shop, I picked myself a new deck and got it gripped up while I was there.  A great service – really helpful – and a profesh grip tape job.  Very happy, nice one again, Lost Art. 

I had been skating a wider deck for a while, over 8.5 inches – and while this gave me some added stability, it wasn’t as easy to do tricks on.

So I opted for something a little smaller, and chose a 7.75″ Death skateboards deck.  Fixed up with Independent trucks, Indy truck bolts and Death wheels, it’s a formidable monster of a skateboard and is preforming fine (unlike me).

The whole set up looks really cool, though it didn’t look all nice and shiny for very long.

Regular readers may recognise this deck – I’ve had one before.  Exact same size and everything.  Which means that this blog post is a waste of time.  Unless – of course – like me, you love looking at pictures of skateboards.

Death have always been a really reliable, quality company and it’s no surprise I’ve decided on another of their decks.

2 x Death decks
3 x Death decks

Santa Cruz Street Creep

Posted on by
1

IMG_4705A few years ago, I had an urge to get me an old school set up.  I already had my everyday double kick street machine, but I felt I needed something that reminded me of my skateboarding youth in the 1980s.

This Santa Cruz Street Creep was the answer.

I remembered the Street Creep from those halcyon days.  I never owned one at the time, though I did own other Santa Cruz decks (see the blog about my Rob Roskopp deck, for one).  The Street Creep was a very cool shape and a cool graphic.

Luckily for me, numerous skateboard companies have been re-issuing the old shapes as collectors pieces.  I picked this re-issue up fairly easily.  I fitted it with some new, wide Independent trucks and some old Santa Cruz Slime Balls wheels and it was ready to go.

The wheels were rescued from an old relic of a board that was passed to me a few years back.  I always wanted some Slime Balls, finally I got a set!

Full view
Top view
Trucks and wheels

The result is a rad skateboard that brings back loads of memories.  The shape is great, though it takes some getting used to after skating shorter, thinner boards for ages.  It’s a fantastic skateboard for blasting a few old tricks on – I find no-complys and some boneless manoeuvres easier on this set up.

With the big, softer Slime Balls attached, this board is great for carving up some of my favourite banked skate spots.  In particular, there’s a messy old “bowl” I like to skate – tarnished with grit and stones, but very skateable with this monster.

Plus there’s the graphic – if you’re an old 80’s skate hound like me, it’s all about the skulls!  Check out the close up the graphic and you’ll see dozens of smaller skulls and faces within the image.

Skateboards are a thing of beauty; this Street Creep looks and rides superb.

IMG_4713

Graphic close up
Wheel close up
Under carraige

Top graohic

Top graphic

Skateboard Museum Update: My First Skateboard Photos

Posted on by
7

IMG_4251My first skate board – new photos

The very first skateboard related post I wrote for the Virtual Hot Tub concerned, quite appropriately, my very first skateboard.  There was only one photo to accompany the article however, and that wasn’t much good.  So, as per the update I did regarding the Variflex Joker, here are a few additional shots of this classic board.

Now in my collection for over thirty five years, this skateboard is the one I learned to skate on.  It was a gift from my Gran; but was neglected for a few years.  Eventually I was bitten by the skateboarding bug, and it was this board that gave me that first taste.

This is a very old, and now faded, plastic board from the 1970’s heyday of skateboarding.  The deck is plastic, like many of the skateboards of the time that served to introduce us to the sport/art.  We called these plastic boards “polyprops” back in the day – as in polypropylene, which the boards were supposedly made out of.  I’m not sure if polyprop is a local term or not.

Plastic skateboards have been given a whole new life recently, with the popularity of Penny skateboards.  The development of this retro trend certainly puts a smile on this old skate dog’s face.

Top view showing brand name
Wheels

On the nose of the deck is what I assume to be the brand name – Albert.  I’ve not seen this company anywhere else – if you know anyhting about them, please leave a comment and let me know.

The trucks are metal, though I have no idea what the wheels are made of.  The wheels are hard, and are sealed with a protector over the bearings.  The wheels have always been like this as far as I remember, so I assume they’re not a softer plastic that’s decayed over time.

Once red, now faded to pink, I still love this old board.  I’m very glad I still have it.

You can read the original blog about My First Skateboard here.

Creature Skateboards – My New Deck

Posted on by
Reply

Today is 21st June 2015, which is Go Skateboarding Day!  To celebrate, here’s a few photos of my latest set up.

This is my new Creature skateboards Sam Hitz pro model.  It’s a huge 8.75″ wide, which is the widest regular street deck I’ve skated in a long time.  I figured that I needed a bigger, fatter deck so it was easier to stay on.  Apparently it’s the way forward for us older guys.  And anyway, it’s still not as wide as the decks I learned to kick flip on in 1989.

Creature are a cool company, I love their graphics and style.

I also needed wider trucks to got with the larger deck.  So I picked up some Independent trucks (of course) from the great Lost Art skateshop in Liverpool.  Thanks guys.

Now I need the rain to stop so I can go outside and skate it…

The Creature Skateboards website is here.

The Independent Trucks website is here.

The Lost Art website is here.

IMG_4233